R&S®Scope Rider
Experience our handheld scope for 2 minutes and you'll never look back

Lab performance in a rugged and portable design – the perfect multipurpose tool for the lab and in the field.


Superior performance

Lab performance in a rugged and portable design

When debugging embedded devices in the lab or analyzing complex problems at the customer site, the R&S®Scope Rider offers the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a battery-operated handheld device.

Explore

Superior performance

Capture signal faults that other oscilloscopes do not see

The high-speed acquisition system of the R&S®Scope Rider captures up to 50 000 waveforms/s and uncovers rare and unexpected signal anomalies.

Superior performance

Deep zoom with 500 kSample memory depth

Debugging serial protocols requires both the ability to capture long signal sequences and to analyze signal parameters of individual data packets.

The R&S®Scope Rider offers up to 500 ksamples of acquisition memory and a zoom function, allowing users to do both.

Superior performance

10 Bit ADC System

A custom-designed 10-bit A/D converter and frontend IC provide the excellent resolution and linearity needed to display signals with high precision.

The low inherent noise of the overall instrument makes it possible to measure even very small signals.

Go back

5 instruments in 1

Debugging power in your hand

With the power of five instruments the R&S®Scope Rider provides the capabilities and the flexibility needed for debugging all kinds of electronic systems in the lab and in the field.

Explore

5 instruments in 1

Lab performance oscilloscope

With 33 automatic measurement functions, the R&S®Scope Rider delivers the capabilities of a lab oscilloscope when analyzing signal parameters.

A digital trigger system with 14 trigger types provides excellent trigger sensitivity and flexibility for capturing any signal detail.

5 instruments in 1

Logic analyzer

The digital logic probe (MSO) of the R&S®Scope Rider features eight additional digital inputs for analyzing control signals, time- correlated to the analog channel signals.

With 250 MHz bandwidth, 1.25 Gsample/s sampling rate and configurable thresholds, it adapts to almost any digital interface.

5 instruments in 1

Protocol analyzer

The R&S®Scope Rider is the first isolated handheld digital oscilloscope with trigger and decode capability for in-depth troubleshooting in the field.

Triggering on protocol events or data enables selective acquisition of relevant events, data and signals.

5 instruments in 1

Data logger

The long-term data logger of the R&S®Scope Rider makes it possible to monitor up to four key measurements at a speed of 1, 2, 5 measurements per second.

The large memory of 2 Msample per channel allows more than 23 days of log duration.

The statistics display provides information about minimum and maximum values with exact time.

5 instruments in 1

Digital multimeter

The two-channel R&S®Scope Rider Model R&S®RTH1002 features a dedicated, isolated digital multimeter with 10 000 count resolution.

The four-channel variant R&S®RTH1004 features a digital voltmeter on each input channel. Statistics information shows minimum, average and maximum values with corresponding time stamps.

Go back

Capacitive touch and keypad operation

Intuitive to use

Making use of the latest display technology, the R&S®Scope Rider provides a crystal clear signal display with a high-resolution capacitive touch color display.

Fully controllable via the keypad, the oscilloscope can also be used with gloves.

Explore

Capacitive touch and keypad operation

Intuitive to use

A central multifunction wheel allows quick adjustment of settings such as the trigger level or the vertical position of each channel.

Go back

Outstanding protection

CAT IV 600 V in a IP51 Housing

Isolated inputs with 600 V CAT IV / CAT III 1000 V rating allow safe measuring in all environments.

Tested in line with military environmental standards, the R&S®Scope Rider provides the ruggedness that is needed for harsh environments.

Explore

Outstanding protection

CAT IV 600 V

Troubleshooting in industrial environments presents many challenges.

Debugging electronic systems at a modern production site can require analyzing low-voltage digital signals, as well as verifying the power quality of a 380 V supply, or testing the power efficiency of electrical drives.

The R&S®Scope Rider CAT IV 600 V rating provides this level of flexibility in a single device.

Go back

Unmatched connectivity

And much more

Wireless LAN* and Ethernet for web-based remote control, easy documentation of measurement results and more than four hours of battery power make the R&S®Scope Rider the right tool for your everyday troubleshooting needs in the lab and in the field.

* Not available in all countries. For more information, please look into our datasheet.

Explore

Unmatched connectivity

Wireless LAN* remote control

An integrated wireless LAN module and web server allows easy remote control of the R&S®Scope Rider.

The waveform display and user interface of the R&S®Scope Rider are directly available in the web browser; all settings can be changed on the screen.

With no software installation required, the R&S®Scope Rider can be controlled from almost every portable device such as a laptop, a tablet or even a mobile phone.

* Not available in all countries. For more information, please look into our datasheet.

Go back

30% discount on multi-domain packages

Save 30% on the purchase of a Rohde & Schwarz oscilloscope plus options and get a versatile companion that will help you easily solve diverse multi-domain challenges. Perform simultaneous time, frequency, logic and protocol analysis on your signals and display the results referenced over time.

R&S®Scope Rider

Lab performance in a rugged and portable design

TEST